Select Page
Search
Generic filters
Exact matches only

Electronics

In the electrical industry, encapsulation and encapsulation of electrical and electronic components and assemblies are increasingly used to improve electrical properties, thermal stability and mechanical strength as well as to protect against the effects of chemical substances and environmental influences. Different electrical insulation materials with specific properties are used depending on the product, the production technology and the respective icing conditions.

Assemblies & printed circuit boards

Electronic components, assemblies and printed circuit boards are predominantly exposed to thermal loads. The sustainable goal of encapsulated electronic components in an assembly is to secure and guarantee their electrical function over a long period of time.

Electric motors & generators

Powerful electric motors and generators require very good electrical properties, high mechanical strength and thermal stability. This is achieved by impregnating stator and rotor windings in the trickle process and in immersion and impregnation baths, including the use of VPI technology. Partial or full casting of stators serves to improve the mechanical and thermal properties, in particular heat dissipation.

Electromobility

Power electronics and battery systems must dissipate the resulting heat via the surface. This requires heat conducting materials. Electronic components are encapsulated with special resin systems and thus protected against external influences, housing components are joined with adhesives and sealed.

Insulators

Components used in power engineering, such as insulators, bushings, busbars, measuring transformers and dry transformers, require very good mechanical and thermal properties as well as excellent dielectric properties of the impregnating and insulating materials, in particular high partial discharge strengths. Heat-curing epoxy resin systems suitable for indoor and outdoor use are excellent for high and medium voltage applications.

LED technology

Transparent silicones are ideally suited for encapsulating special LED assemblies. These products are characterized by high elasticity and special low-temperature flexibility, which enable the encapsulation of pressure-sensitive components. Silicone potting compounds guarantee high operating temperatures and exhibit very good chemical resistance. Depending on the application, electrical encapsulation mainly uses addition-curing 2-component systems, but also air moisture-curing 1-component products.

Sensors

Aggressive environmental conditions and thermal requirements require high demands on the potting compound, which is used for the encapsulation of sensors of various assemblies. In some applications plugs and switches are used.

Structural adhesives in electronics

Adhesives are used in a wide variety of applications in the manufacture of electrical or electronic components and devices, such as the assembly or fixing of components or the bonding or sealing of housings. In addition to the actual adhesion properties, other special requirements such as flame retardancy and heat conduction often have to be taken into account.

Transformers

When casting or encapsulating inductive components, chokes, coils and transformers of different designs, the casting compound used has the task of insulating the current-producing parts and at the same time ensuring optimum heat dissipation.

Assemblies & printed circuit boards

Electronic components, assemblies and printed circuit boards are predominantly exposed to thermal loads. The sustainable goal of encapsulated electronic components in an assembly is to secure and guarantee their electrical function over a long period of time.

Electric motors & generators

Powerful electric motors and generators require very good electrical properties, high mechanical strength and thermal stability. This is achieved by impregnating stator and rotor windings in the trickle process and in immersion and impregnation baths, including the use of VPI technology. Partial or full casting of stators serves to improve the mechanical and thermal properties, in particular heat dissipation.

Electromobility

Power electronics and battery systems must dissipate the resulting heat via the surface. This requires heat conducting materials. Electronic components are encapsulated with special resin systems and thus protected against external influences, housing components are joined with adhesives and sealed.

Insulators

Components used in power engineering, such as insulators, bushings, busbars, measuring transformers and dry transformers, require very good mechanical and thermal properties as well as excellent dielectric properties of the impregnating and insulating materials, in particular high partial discharge strengths. Heat-curing epoxy resin systems suitable for indoor and outdoor use are excellent for high and medium voltage applications.

LED technology

Transparent silicones are ideally suited for encapsulating special LED assemblies. These products are characterized by high elasticity and special low-temperature flexibility, which enable the encapsulation of pressure-sensitive components. Silicone potting compounds guarantee high operating temperatures and exhibit very good chemical resistance. Depending on the application, electrical encapsulation mainly uses addition-curing 2-component systems, but also air moisture-curing 1-component products.

Sensors

Aggressive environmental conditions and thermal requirements require high demands on the potting compound, which is used for the encapsulation of sensors of various assemblies. In some applications plugs and switches are used.

Structural adhesives in electronics

Adhesives are used in a wide variety of applications in the manufacture of electrical or electronic components and devices, such as the assembly or fixing of components or the bonding or sealing of housings. In addition to the actual adhesion properties, other special requirements such as flame retardancy and heat conduction often have to be taken into account.

Transformers

When casting or encapsulating inductive components, chokes, coils and transformers of different designs, the casting compound used has the task of insulating the current-producing parts and at the same time ensuring optimum heat dissipation.

Ara® Ecocleaner Precision cleaner for electro casting

Cleaner/rinsing agent for the removal of polymer residues such as polyurethane and epoxy resins, non-hazardous, biodegradable.

Aradur® Hardeners

Amine and anhydrite-based hardener products for use with epoxy resins.

Araldite® 1-component epoxy resin adhesives

Form a very good contact adhesion to metals as well as duromers and have an excellent ratio between shear and peel strength.

Araldite® 2-component epoxy casting resins

Unfilled and filled, cold and hot-curing epoxy resin-based casting compounds for atmospheric or vacuum casting with a wide range of properties.

Araldite® 2-component epoxy casting resins

For all industrial applications, from electronics to mold making. The portfolio includes products ranging from particularly low shrinkage for high-precision castings to products resistant to high temperatures and chemicals and materials with excellent insulation properties for electrical engineering applications.

Araldite® 2-component epoxy resin adhesives

Depending on the type, they can be used for structural bonding of metals, thermosets and reinforced plastics. Can have very high strength and temperature resistance (up to 210°C).

Araldite® 2-component epoxy resins

For almost all applications in industry and trade, where high-strength and permanently resistant adhesive bonds of the most diverse substrates are required.

Araldite® 2-component epoxy trickle resins

Trickle resins with very good electrical properties, high mechanical strength and heat form stability, suitable for high operating temperatures.

Araldite® 2-component methyl methacrylate adhesives

For all high-strength yet tough elastic adhesive joints. Very high tolerance to poorly bondable substrates or surfaces that are not optimally prepared.

Araldite® 2-component polyurethane adhesives

For flexible to high-strength, for fast to slow bonding of a large number of substrates.

Araldite® 2-component polyurethane casting resins

For all industrial applications, from electronics to mold making. Available in a high variety of types, whereby a particularly fine adjustment to the requirements of the application is realizable.

Araldite® 2-component polyurethane structural adhesives

Structural adhesives with a very broad adhesion spectrum on metals, plastics and fibre composites. Excellent ratio between strength and elongation at break.

Araldite® / Aradur® Formulated resin / hardener systems

High-performance resin systems for all industrial applications, available in various varieties for all common manufacturing processes.

Araldite® Color pastes

Allow the product color to be adapted to customer requirements with light-colored potting or laminating resin systems.

Araldite® Epoxy base resins

For formulation by the end user, many product variants are mostly available in large containers.

Araldite® Epoxy impregnating resins for casting

Epoxy resin systems for impregnation of windings in classical atmospheric or vacuum casting.

Araldite® Epoxy impregnating resins for dip impregnation

Epoxy resins with particularly high storage stability in immersion baths for use in impregnating baths, with high glass transition, suitable for high and operating temperatures.

Araldite® Fillers

Allow the individual adaptation of unfilled resin systems to the requirements of the user.

Araldite® Flame retardant epoxy adhesives

Flame retardant 2-component adhesives with classified fire performance according to UL94 and EN 45545-2 standards.

Araldite® Laminating resins

Epoxy laminating resins for component production and mold making, especially proven in vehicle construction, racing and sports equipment construction, aerospace, transportation and marine, wind power, electronics and medical technology.

Araldite® Thermally conductive epoxy adhesives

2-component adhesives with higher thermal conductivity values for improved heat transfer of components.

Arathane® 2-component polyurethane casting resins

Potting compounds with very good processing properties, for very flexible to hard moulding materials with good temperature stability up to thermal class F, thermally conductive, UL94.

AXAREL® Precision cleaner for electronics production

Solvent-based cleaner for adhesive tape and flux residues, residues of SMD adhesives and solder pastes. Can be used manually or in immersion and ultrasonic cleaning processes.

BIOACT® Precision cleaner for electronics production

Batch flux cleaner for use in spray, immersion or ultrasonic cleaning processes.

Bluesil™ 2-component silicone casting compounds

For all areas of mold making where highly flexible molding compounds have to be used.

Bluesil™ 2-component silicones

2-component silicone casting compounds, optically clear or containing filler for higher heat dissipation.

Bluesil™ Silicone gels

2-component silicones with gel-like end properties, extremely low hardness and extremely low elasticity modulus, optically clear.

CAF® 1-component silicone adhesives

Room temperature crosslinking adhesives and sealants for industry and trade, maintenance and repair, high-performance applications with high temperature resistance, protection and coating of electronic assemblies with castable products.

CAF® 2-component silicone adhesives

Through special activation, they enable a hardening process without condensation products (e.g. acetic acid) even in closed joints without access to humidity and offer particularly fast hardening.

Cinquasia® Organic pigment powder

Organic pigments with excellent light fastness and high chemical and solvent resistance.

Euromelt® 2-component polyamide hotmelt casting compounds

1-component co-polyamides for a wide operating temperature range and low viscosity for very good flow behavior with only low potting pressure.

Euvinyl® Pigments in PVC carrier

Irgafos additives are secondary antioxidants that act as peroxy radical scavengers during plastics processing.

Glacier Mica-based interference pigments

Titanium-coated synthetic mica for producing white sparkling effects with bluish frost character.

Heliogen® Organic pigment powder

Organic pigments with excellent light fastness and high chemical and solvent resistance.

Irgaclear® Clarifier nucleating agents

Characterized in particular in the application in polypropylene, by the transparency of the polymer is significantly increased.

Irgafos® Phosphite process stabilizers

Irgafos additives are secondary antioxidants that act as peroxy radical scavengers during plastics processing.

Irgalite® Organic pigment powder

Organic pigments with excellent light fastness and high chemical and solvent resistance.

Irgazin® Organic pigment powder

Organic pigments with excellent light fastness and high chemical and solvent resistance.

Kerimid® Bismaleimides

For the formulation of thermally highly stable, weather-resistant, often powdery compounds for adhesives, composites or coating resin systems. Also suitable for use with liquid epoxy resin systems to increase thermal stability.

LENIUM® Precision cleaner for electronics production

Steam degreasing products and solvent cleaners for use with open or closed vacuum steam cold cleaners.

Lumina® Mica-based interference pigments

Titanium-coated synthetic mica for producing white sparkling effects with bluish frost character.

MagnaPearl® Pearlescence pigments

Pearlescence pigments based on oxide-coated natural mica. Different particle sizes and oxide layer thicknesses give the pigments the different semi-transparent sparkling effects in different metallic and colored shades.

Matrimid® Polyimides and bismaleimides

For the formulation of thermally highly stable, weather-resistant hardener systems for adhesives, composites or coating resin systems with low outgassing and excellent dimensional stability.

Pactan 1-component silane-modified polymer adhesives

1-component, stable material based on hybrid polymer, air humidity-curing. Scentless after cross-linking. Good ageing and weathering resistance, as well as chemical resistance.

PACTAN 1-component silicone adhesives and sealants

Room temperature crosslinking adhesives and sealants for the encapsulation of electronic assemblies, for the bonding of cooker components (FDA-approved), engine components with high temperature loads, car headlights and for showcase construction.

Pactan® 1-component silicones

Neutral-curing 1-component silicones with very good adhesion properties for potting and sealing electrical components.

PACTAN 2-component silicone adhesives and sealants

Due to the cross-linking by installation of released water from the B-component, large adhesive layer thicknesses and a high hardening speed can be achieved. Suitable for flexible glass-to-metal bonding and showcase construction, partly specially designed for the production of foam seals, e.g. for household appliances, electrical and electronic housings.

Pactan Silicone and hybrid sealants

Room temperature curing (RTV) 1- or 2-component adhesive and sealing compounds based on silicone and hybrid with a broad adhesion spectrum in electrics, electronics, household appliances, food contact, headlight bonding and many more.

Paliogen® Organic pigment powder

Organic pigments with excellent light fastness and high chemical and solvent resistance.

Paliotol® Organic pigment powder

Organic pigments with excellent light fastness and high chemical and solvent resistance.

RenCast® 2-component epoxy casting resins

For the production of high-precision castings in model and mold making. Products with excellent resistance to high temperatures are available.

RenCast® 2-component polyurethane fast casting resins

For the production of control or auxiliary castings in model and mold making.

RenLam® Laminating resins

Epoxy laminating resins with focus on mould and tool making.

RenLease® Release agents

Wax or silicone oil based release agents as demoulding aid for mould bound electro casting.

RenLease® Release agents

For easy demolding of components made of polyurethane or epoxy resins.

RenPim™ 2-component polyurethane casting resins

For component production in rapid prototyping. Suitable for vacuum casting.

Rhodeftal® Polyamidoimides, polyamide imides, polyamide imides

For the formulation of protective varnishes and paints.

Rhodorsil® 2-component silicone casting compounds

For all areas of mold making where highly flexible molding compounds have to be used.

RickoStab Multi-component additive packages

The combination of several additives, e.g. primary and secondary antioxidants, HALS and UV absorbers facilitate dosage during processing.

Thermally conductive silicones

2-component silicone casting compounds, gels and gap fillers with excellent thermal conductivity.

Tactix® Bisphenol-A epoxy resins

Hydrocarbon epoxy novolak resins for optimizing the thermal, chemical and mechanical resistance of epoxy resin formulations. Typical applications are resin systems for adhesives, prepreg production, filament winding and RTM.

Bodo Möller Chemie

Events

JEC World 2020

03.03.2020, Paris

Bonding Seminar 2020

14.05.2020, Augsburg

News

The specialty chemicals expert distributes innovative Loctite products for electrical and electronics applications

Comprehensive ISO-certified production with growing capacity for epoxy resins, polyurethanes and packaging fillers