Foam is a dispersion of a gas in a liquid. The occurrence of foam when producing and processing coatings, printing inks, plastic materials, but also in many other industrial processes, is usually not desired.
Defoamers or air release agents prevent and destroy the foam bubbles and enable an improved processing, a perfect surface and optimum product properties.
Araldite® 2-component epoxy resin adhesives
Depending on the type, they can be used for structural bonding of metals, thermosets and reinforced plastics. Can have very high strength and temperature resistance (up to 210°C).
Araldite® 2-component methyl methacrylate adhesives
For all high-strength yet tough elastic adhesive joints. Very high tolerance to poorly bondable substrates or surfaces that are not optimally prepared.
Araldite® Rapid 2-component fast curing epoxy adhesives
Fast curing, sets in 5 minutes, bonded joint can be handled after 2 hours. Waterproof, oil impact and chemical resistant. Bonds anything like metals, ceramic, plastic, glass, wood, rubber etc. Ideal for small assembly or repair (Industrial and DIY usage).
Araldite® Rapid Steel 2-component steel filled high strength adhesives
Metallic grey, gap-filling, steel filled epoxy. Sets in 4 minutes, bonded joint can be handled after 2 hours. Waterproof, oil impact, chemical and heat resistant. Adhesive can be drilled, sanded and painted. For most types of metals including steel, aluminum, iron, copper and brass. Ideal for Automotive repairs, household and general metal repairs.
Araldite® Rapid Transparent 2-component transparent and fast curing epoxy adhesives
Sets in 5 minutes, waterproof, oil impact and chemical resistant. Bonds anything to anything like metals, ceramic, plastic, glass, wood, rubber etc. Ideal for Industrial and DIY usage.
Araldite® Standard 2-component high strength epoxy adhesives
Sets in 90 minutes, long working life, waterproof, oil impact and chemical resistant. Bonds anything to anything like metals, ceramic, plastic, glass, wood, rubber etc. Ideal for large assembly or many components (Industrial usage).
BETACLEAN™ Surface cleaners
Cleaner for the removal of dirt such as dust, grease and oil from adhesive surfaces. Depending on the application, cleaners are available for use on metals, plastics, glass and other substrates.
BETAMATE™ 1-component silane-modified polymer adhesives
1-component air humidity curing sealant based on hybrid polymer with permanent elasticity. Scentless, with low shrinkage, good UV stability and good primerless adhesion on many substrates.
L&L Room Temperature curing MMA Adhesives
Structural 2-component, methacrylate-based adhesives. Broad adhesion spectrum on different substrates. High strengths, fast curing times and elongation at break up to 70%.
L&L Seal 1-component silane-modified polymer adhesives
Primerless systems with good adhesion to metals, composites and plastics. Solvent- and isocyanate-free, with good UV resistance and low shrinkage for low marking.
Pactan 1-component silane-modified polymer adhesives
1-component, stable material based on hybrid polymer, air humidity-curing. Scentless after cross-linking. Good ageing and weathering resistance, as well as chemical resistance.
Permabond® Cyanoacrylate adhesives / Cyanoacrylate-based superglue
Cyanoacrylate adhesives are 1-component adhesives which often harden in a few seconds due to a reaction with traces of moisture on the surface of the material to be bonded. They have been formulated to cover a wide range of adhesive properties.
Permabond® Polyolefin primer for pretreatment
For surface pretreatment of polyolefins (PP, PE etc.), PTFE and silicones. For bonding with CAs, which are difficult to bond without special pre-treatment due to the low surface energy.
Razeen® Diluents and modifiers
Range of reactive diluents and specially selected resins with moderate reduction of viscosity, adhesion to metallic surfaces, flexibility, resistance against chemicals, good crystallization resistance at low temperature.
Razeen® Epoxy solution resins
Variety of solvent diluted resins, usually in xylene, available as high molecular weight and lower molecular weight resins. They are versatile in applications and provide improved flexibility to the coatings.
Razeen® Liquid epoxy resins
Unmodified BPA general purpose 100% solids resins for solvent free coatings, matrix adhesives, civil engineering, filament winding, acrylation and resin production. Mainly used in coatings & floorings for food and pharmaceutical processing areas.
Razeencure® Curing agents
Wide portfolio of curing agents based on cycloaliphatic adducts, accelerated/modified polyamines, polyamide adducts giving good yellowing resistance, long pot life and good chemical resistance.