Select Page
Search
Generic filters
Exact matches only
Filter by Custom Post Type

Sealants

Sealants are cold and hot crosslinking systems based on a wide variety of chemical compounds with permanently high elasticity and a broad adhesion spectrum on numerous parts to be joined. They are suitable for sealing seams, filling gaps and reducing vibrations in order to increase driving comfort.

BETAFILL™ Polyurethane sealants

Air humidity curing, overpaintable, elastic adhesive and sealing compounds based on 1-component polyurethane for sealing, filling and sealing in vehicle construction.

BETAGUARD™ Rubber-based sealants, relining adhesives

Rubber-based, expandable sealing and relining adhesives with low strength. To prevent vibrations by compensating for tolerances and sheet spacings in the carcass.

L&L Acoustic Sealants

L&L Acoustic Sealants are used as self-adhesive inflation tapes in automotive engineering to prevent the transmission of sound into the vehicle interior. Heat-activated, these foam up, show different expansion, density and cell structures and completely seal off cavities.

L&L Aircraft Panel Reinforcements

Structural 2-component, methacrylate-based adhesives. Broad adhesion spectrum on different substrates. High strengths, fast curing times and elongation at break up to 70%.

L&L Core Splice Adhesives

Expanding adhesive mats used in composite sandwich structures. For bonding honeycomb joints and edge formation on GRP/CFRP pressed parts. Mats can be cut to size and expand thermally in ovens, presses or autoclaves. Low density.

L&L Heat activated sealants

L&L Heat activated sealants are applied as self-adhesive inflatable tapes into body cavities (A/B/C columns, roof frames etc.), expand these by heat activation, e.g. in the KTL process, and seal these completely against the penetration of moisture, air and dust.

L&L Hybrid sealants

Primerless UV-stable adhesive and sealing systems on hybrid basis with strong adhesion to metal, composites, thermoplastics with a broad mechanical spectrum.

L&L Room Temperature curing MMA Adhesives

Structural 2-component, methacrylate-based adhesives. Broad adhesion spectrum on different substrates. High strengths, fast curing times and elongation at break up to 70%.

L&L Room temperature curing sealant/adhesives

Elastic 1K sealants based on MS polymer and elastic 2K adhesives with various mechanical properties. Direct adhesion to a variety of materials without pre-treatment.

L&L structural adhesive films

Self-adhesive EP adhesive strips, activated by heat, typically used in body-in-white construction. Different expansion rates enable bridging of gaps, compensation of thermal expansion and galvanic separation of substrates. Reinforcement of flat components.

L&L Structural adhesive tapes

Structural 2-component, methacrylate-based adhesives. Broad adhesion spectrum on different substrates. High strengths, fast curing times and elongation at break up to 70%.

Pactan Silicone and hybrid sealants

Room temperature curing (RTV) 1- or 2-component adhesive and sealing compounds based on silicone and hybrid with a broad adhesion spectrum in electrics, electronics, household appliances, food contact, headlight bonding and many more.

Bodo Möller Chemie

Partners

Araldite® – Bonding solutions for railway industry

Araldite® - Bonding solutions for railway industry

Solutions

Events

TechTage 2019

04.06.2019, Neustadt an der Donau

News

E-mobility, lightweight construction and modern surface technologies are important themes for the future of composites