Methyl methacrylate adhesives (MMA)

Methyl methacrylate adhesives are polymerisation adhesives which harden by radical polymerisation and, depending on the formulation, can exhibit a wide variety of properties and strengths on a wide variety of materials. They are characterized by a very good ratio of open time to curing time.

Home » Solutions » Adhesives » Methyl methacrylate adhesives (MMA)

1-component methyl methacrylate adhesives

No-Mix methyl methacrylate adhesives do not require a mixture of resin and hardener before joining. The hardener lacquer can be applied to the substrate in advance, the reaction only starts when the hardener lacquer comes into contact with the resin. Adhesive layer thicknesses of max. 0.8 mm must be observed here.

2-component methyl methacrylate adhesives

2-component methyl methacrylate adhesives are fast-hardening adhesives with a very broad adhesion spectrum. They are usually mixed and applied directly before application. They can achieve high adhesion values even after minimal surface pretreatment.

Methyl methacrylate adhesives (MMA)

1-component methyl methacrylate adhesives

2-component methyl methacrylate adhesives

Bodo Möller Chemie

Partners

Solutions

Events

News

Head Office Germany

Austria / Slovenia

Switzerland

Benelux

Denmark

Finland / Estonia

France

France Sales Office Lyon

Poland / Lithuania / Latvia

Sweden / Norway

Russia

Czech Republic

Slovakia

Hungary

Croatia

Romenia

United Kingdom / Ireland

Spain

Portugal

South Africa / Sub-Saharan Africa - Sales Office Port Elizabeth

South Africa / Sub-Saharan Africa - Sales Office Johannesburg

Egypt - Sales Office Cairo

Egypt - Sales Office Alexandria

Egypt - Production Site Sadat City

Morocco

Kenya

Middle East

China

China

India

Israel – Sales Office Tel Aviv

Israel – Sales Office Tel Aviv

USA

Mexico