Future Mobility
Bodo Möller Chemie is a global full-line supplier for future mobility and provides a wide range of high-performance products
Our adhesives, sealants, insulating resins and encapsulants enhance the performance of motors, batteries, electrical control units, wiring harnesses, connectors, inverters, converters, sensors (ADAS), switches and EV-charging infrastructures.
Bodo Möller Chemie is your expert for Future Mobility
Electromobility is a central part of sustainable and climate-friendly transportation and, in line with trends, is becoming increasingly popular as the demand for electric cars has increased in recent years.
E-mobility applications demand advanced performance encapsulants, gap fillers, adhesives and sealants. Thermally conductive materials optimize the heat management and ensure higher performance and extended lifetime of electrical and electronic components.
With the top products of our long-time partners, we are on the pulse of the times.
For all information at a glance, please download our brochure about future mobility solutions and technologies.
More information needed?
You have a question about one of our products or need technical advice? Our experts have long-time experience in the e-mobility market and are happy to help.
Charging infrastructure
Charging stations generate electrical energy for charging plug-in electric vehicles.
Electric charging stations must be weather, corrosion and rust resistant. Outdoor charging stations must withstand high and very low temperatures.
Bodo Möller Chemie provides adhesives and sealants, encapsulants, coatings, and thermal management materials for charging infrastucture.
Potting systems
Potting systems for easy processing at room temperature and not necessarily with dispensing equipment. Systems also available in small containers.
Product Highlights
Araldite® XB 2252-1/ Aradur® XB 2253-1
Optimally filled casting system for processing and curing at room temperature or slightly higher temperatures.
Arathane® XB 5633 / Arathane® HY 5610
Soft multipurpose polyurethane system for pressure sensitive devices.
Araldite® CW 229-3/ Aradur® HW 229-1
Liquid, hot curing two-component epoxy casting systems containing mechanically reinforcing fillers.
Adhesive systems
High-performance products within epoxy, acrylic and polyurethane technologies.
Product Highlights
Araldite® 2014-2
Creates reliable bonds, even under harsh conditions and high temperatures.
Araldite® 2080
Low odor, non-flammable and primer-free acrylate adhesive with exceptional bond performance and a low toxicity profile.
Araldite® 2081
Low odor adhesive, optimized for plastic substrates. Helps to drive productivity and lower costs with none of the compromises associated with traditional methyl methacrylate (MMA) and other adhesive products, such as high odor, flammability, high toxicity profiles, and surface preparation.
Araldite® 2051
Bond at up to 40°C without being affected by humidity, enabling repair work in cold conditions.
Thermal management materials
Thermal management materials provide gasketing and protection solutions to protect the electronics in EV chargers from elemental exposure, thermal interface materials to help increase power conversion efficiency and reliability, potting materials to provide protection and toughness to the charging connectors and adhesives to increase productivity in manufacturing.
Product Highlights
BETAFORCE™
Thermally conductive polyurethane adhesives.
BETATECH™
Liquid gap filler.
BERGQUIST® Thermal interface materials
Thermally conductive adhesive tapes, Pads, Gap fillers, Phase change materials, Thermally conductive adhesives (liquids), Thermally conductive insulators.
LOCTITE® Thermal management materials
Bond at up to 40°C without being affected by humidity, enabling repair work in cold conditions.
Henkel electronics adhesives and TIM solutions for charging stations
For more information about the thermal management portfolio, please follow the link
For more information about our service and solutions for thermal interface materials, please follow the link
Sensors (ADAS)
Sensors are installed almost everywhere in the car: you can find them in the engine, in the wheels, in the airbag. They are also important in the driving and parking function. In addition to radar, ultrasound and camera, lidar will soon also play an important role.
Encapsulants protect sensitive devices, improve thermal management, and meet the most stringent temperature resistance requirements. They offer high flexibility and crack resistance, optimized thermal conductivity, and excellent thermal endurance, as well as improved chemical stability.
Product Highlights
Arathane® 5631/ Arathane® HY 5611-1
Thermal Class F casting and impregnating system for high temperature applications. Processind and curing at room temperature.
Araldite® XB 2252-1 / Araldite® XB 2253-1
Optimally filled casting system for processing and curing at room temperature or slightly higher temperatures.
Araldite® CW 5633/ Aradure® HY5610
Polyurethane, halogen free, casting and impregnating system for processing and curing at room temperature.
BLUESIL ESA 7250 A&B E5
Two component, optically clear, high strength silicone elastomer, that cures by a polyaddition reaction at room temperature. The silicone elastomer is particularly suited for potting applications or wherever a tough, elastic and transparent protection is required.
E-Motor
Impregnating resin systems
Impregnation resin systems increase stability, improve heat dissipation, and add protection from humidity, dirt and chemicals.
Product Highlights
Araldite® MY 790-1 CH (resin) / Aradur® HY 1102 (hardener)
Liquid, hot-curing impregnating system based on distilled Bis-A resin and anhydride hardener with long pot-life, high glass transition temperature and excellent electrical and mechanical end properties.
Araldite® 30790
1-component. Same properties as Araldite® MY 790-1 CH / Aradur® HY 1102.
Araldite® XD 4410
Hot curing, 1 component impregnating system based on bisphenol-A epoxy resin and a latent hardener.
Electric control units
Power Electronics are critical components of all electrified vehicles and charging stations. Encapsulation technology can substantially improve the performance, efficiency and cost of these devices.
Polyurethane, halogen free, casting and impregnating system for processing and curing at room temperature. Soft multipurpose polyurethane system for pressure sensitive devices. Available in various colors. Flammability certification UL 94 V-0 (6.0 mm)
Good thermal shock resistance. Good dielectric properties. Good mechanical properties.
Excellent thermal endurance. Suitable for thermal class 180 (H) applications.
Liquid, brown, hot-curing two-component epoxy casting system with excellent crack resistance.
Prefilled with slightly abrasive, mechanically reinforcing fillers.
Contact
Your experts for Germany
Bernhard Vreden
M +49 173 700 31 26
b.vreden@bm-chemie.de
Rainer Fausel
M +49 151 18815644
r.fausel@bm-chemie.de
Reno Wirnitzer
M +49 151 14824561
r.wirnitzer@bm-chemie.de
Bodo Möller Chemie is your expert for Hydrogen infrastructure
Hydrogen offers great value for a sustainable future of mobility escpecially for passenger cars and heavy-duty commercial transportation. It’s a locally emission-free mobility with unrestricted everyday use and has a much higher effiency than e-fuels.
Pressure vessel require ultimate burst pressure, fire and impact resistance. The manufacturing of high pressure vessels require resin systems of thermal resistance (Tg ≥ 115°C), tensile strength and elongation at break as well as fracture toughness (KIc, GIc). The systems need to have a chemical resistance and adhesion to fibers.
For all information at a glance, please download our brochure about future mobility solutions and technologies.
More information needed?
You have a question about one of our products or need technical advice? Our experts have long-time experience in the e-mobility market and are happy to help.
Manufacturing process
Wet filament winding
Towpreg winding
Wet filament winding
Wet filament winding
Optimized technology with proven equipment. Winding speed of 1/2m/s max. Range of winding angles possible. No cold storage necessary.
Product Highlights
Araldite® LY 1135-1 A /Aradur® 917-1 / Acc 960-1
- Low enthalpy of reaction
- Good thermomechanical properties
NEW Araldite® LY 3608 / Aradur® 917-1 / Acc 960-1
- High fracture toughness
- Low enthalpy of reaction
ARALDITE® LY 1564 / ARADUR® 3474
- Low cure temperature
- Excellent dynamic properties
Towpreg winding
Towpreg winding
Clean process with high reproducibility for consistent quality and short cure times. Fast winding speed (>5 m/s). Variable winding speed (fast on hoops, slower on domes).
Product Highlights
Araldite® LY 3508 / Aradur® 1571 / Accelerator 1573
- Low tack
- Long out life
- High thermal resistance
New Araldite® LY 3512 / Aradur® 1571 / Accelerator 1573
Latent epoxy formulation
- Intermediate tack
- High mechanical strength
Araldite® LY 3708 / Aradur® 1571 / Accelerator 1575
- Outstanding fracture toughness
- Fast cure (Hydrogen vessels cured in 30min)
Fire protection
Resistance to fire is passively increased
Exposure to high temperatures or flames, leads to expansion of the intumescent coatings and it acts as an insulator.
An easy and efficient way to protect substrates
The intrinsic properties of the substrate are not altered. Easily applicable in thin or thick layers.
Features and Benefits
- Two-component polyurethane system
- 100% solids
- Processable @ 1:1 volume ratio
- Fast cure – touch-dry < 5 seconds
- Passive fire protection
- Formation of an insulative char layer
- Very good mechanical, adhesion and chemical resistance properties
Contact
Dr. Christoph Schnöll
M +43 664 8954390
c.schnoell@bm-chemie.at
Stephan Körver
M +49 2245 619632
s.koerver@bm-chemie.de
Bodo Möller Chemie is your expert for Battery solutions
Batteries, installed in electrical vehicals, demand advanced performance materials to charge faster, reduce weight and be resistant against temperature and environmental impacts.
Our adhesives, sealants, resin systems and encapsulants enhance the performance of battery solutions.
For all information at a glance, please download our brochure about future mobility solutions and technologies.
More information needed?
You have a question about one of our products or need technical advice? Our experts have long-time experience in the e-mobility market and are happy to help.
Lid bonding & sealant
Foam gasket
Electric vehicle battery gaskets provide environmental sealing and thermal insulation. They may also provide fire protection and shielding against electromagnetic interference (EMI). Advantages of foam gaskets are contract manufacturing possible and battery is serviceable.
Product Highlights
Pactan® 9005
2 component heat cure closed cell foam.
Temperature resistance up to 200 °C and flame retardant.
BlueSil™ RTF 3244
2 component heat cure closed cell foam.
Temperature resistance up to 272 °C and flame retardant.
Lid seal
Elastic lid seal adhesives are used to protect sensitive components against moisture and contamination.
Product Highlights
BETAMATE™ 7170-1F + ACCEL 2 (1 or 2 component)
Environmental moisture curing.
Solvent adhesive with excellent sag and bead stability.
Water-based accelerator paste.
CAF 33 AXAD BLACK
Non-flowing, black, white translucent, room temperature curing silicone elastomer.
High temperature resistance, heat stability, good dielectric properties.
Polyurethane Systems allow for the development of thermally conductive and non-thermally conductive adhesives, gap fillers, and pottants for a wide range of battery types, such as prismatic, pouch, and cylindrical cells.
Cell bonding
Thermal management is related to the temperature regulation of the battery and ensures continuous optimal operating conditions. The performance of a battery and its temperature are closely related.
Thermally conductive adhesives
Batteries perform best operationally and from a safety standpoint when their temperature is maintained through materials that enhance heat dissipation and avoid thermal runaway – during both charging and operation.
Product Highlights
BETAFORCE™ 2900 TC
Thermally conductive, flame retardant, 2-component polyurethane adhesive for cell bonding.
Specially developed for battery assembly.
High mechanical strength: 8 MPa, elongation >11 %.
Gap fillers
Maintains thermal conductivity in EV batteries to help control temperature. Thermal management for battery modules is essential to safety and long service life.
Product Highlights
BETATECH™ 1020
One-component thermal interface material with a thermal conductivity of 2 W/mK.
Efficient joining of the battery module without excessive pressures.
Free of silicone.
More information needed?
You have a question about one of our products or need technical advice? Our experts have long-time experience in the e-mobility market and are happy to help.
Electronic protection
Potting systems
Potting systems for easy processing at room temperature and not necessarily with dispensing equipment. Systems also available in small containers.
Product Highlights
Araldite® XB 2252-1/ Aradure® XB 2253-1
Optimally filled casting system for processing and curing at room temperature or slightly higher temperatures.
Arathane® XB 5633 / Arathane® HY 5610
Soft multipurpose polyurethane system for pressure sensitive devices.
Arathane® CW 5631 / Arathane® HY 5611-1
Thermal Class F casting and impregnating system for high temperature applications. Processing and curing at room temperature.
Adhesive systems
High-performance products within epoxy, acrylic and polyurethane technologies.
Product Highlights
Araldite® 2014-2
Creates reliable bonds, even under harsh conditions and high temperatures.
Araldite® 2080
Low odor, non-flammable and primer-free acrylate adhesive with exceptional bond performance and a low toxicity profile.
Araldite® 2081
Helps to drive productivity and lower costs with none of the compromises associated with traditional methyl methacrylate (MMA) and other adhesive products, such as high odor, flammability, high toxicity profiles, and surface preparation.
Araldite® 2051
Bond at up to 40°C without being affected by humidity, enabling repair work in cold conditions.
Enclosure assemblys
Cage assemblys are necessary to protect a battery pack in a vehicle.
Laminating resins
Sealants
Structural adhesives
Reinforcement
Pretreatment
Laminating resins
Composite battery housing designs can reduce weight by up to 40% versus metal concepts, while meeting all safety, mechanical and thermal requirements. ARALDITE® resin systems enable the design of battery housings that pass all relevant fire resistance, crash resistance, environmental aging and thermal shock tests, as defined in international standards. High thermomechanical properties ensure battery cells are fully protected, while providing design freedom, light weight and corrosion resistance.
ARALDITE® FST 40004 /ARALDITE® FST 40005
First generation, halogen-free and filler free system, combining fire resistance and very high thermal resistance. It enables the production of large parts such as battery housing.
ARALDITE® FST 40020 /ARALDITE® FST 40021
Wet Compression Molding
Second generation fire resistant system dedicated to the mass production of battery housing parts. It offers excellent processability and fast cure.
ARALDITE® LY 3585 /ARADUR® 3475
Wet Compression Molding
Fast cure solution offering enhanced processing (1 min injection window at 115°C), reduced curing cycle and improved toughness versus state-of-art technology (ARALDITE® LY 3585 / XB 3458). High clarity system for production of cosmetic parts.
Sealants
BETAFIL™ 216
1-component, polyurethane-based seam sealants, combining medium strength bonding and sealing properties in a wet one-step operation.
BETAFIL™ 217
One-component moisture curing polyurethane seam sealer with permanent elasticity and good adhesion to different substrates.
BETAFIL™ 218
1-component, adhesive, elastic and moisture-curing sealant based on polyurethane.
Structural adhesives
We recommend a structural adhesive as an alternative to welding with a medium modulus, short to long open time,18 MPa tensile strength and 80 % elongation.
Araldite® 2080
Low odor, non-flammable and primer-free acrylate adhesive with exceptional bond performance and a low toxicity profile.
Araldite® 2081
Low odor adhesive. Helps to drive productivity and lower costs with none of the compromises associated with traditional methyl methacrylate (MMA) and other adhesive products, such as high odor, flammability, high toxicity profiles, and surface preparation.
BETAFORCE™ 9050 S
2-component polyurethane adhesive with high modulus and short working time at room temperature, specially developed for structural bonding.
- Good adhesion to plastics, composites and painted surfaces
- Good adhesion to coated metallic surfaces
- Pretreatment-free adhesion to many composite materials
- Optimized for accelerated adhesion build-up by heating
- Very high mechanical strength and high elongation at break
- Low temperature dependence of the module.
BETAFORCE™ 9050 M
2-component polyurethane adhesive with high modulus and moderate working time at room temperature, specially developed for structural bonding.
- Good adhesion to plastics, composites and painted surfaces
- Good adhesion to coated metallic surfaces
- Pretreatment-free adhesion to many composite materials
- Optimized for accelerated adhesion build-up by heating
- Very high mechanical strength and high elongation at break
- Low temperature dependence of the module.
BETAFORCE™ 9050 L
2-component polyurethane adhesive with high modulus and long working time at room temperature, specially developed for structural bonding.
- Good adhesion to plastics, composites and painted surfaces
- Good adhesion to coated metallic surfaces
- Pretreatment-free adhesion to many composite materials
- Optimized for accelerated adhesion build-up by heating
- Very high mechanical strength and high elongation at break
- Low temperature dependence of the module.
Reinforcement
Structural PU-foam
Pretreatments
Neutral degreasing with temporary corrosion protection as intermediate or final treatment, water- and oil-based corrosion protection, highly effective degreasing prior to surface treatment and painting, paint stripping, paint coagulation, descaling and pickling.
Product Highlights
BONDERITE® C-AK 1563 – alkaline cleaner for steel and aluminum
BONDERITE® M-NT 2040 – chrome-free pickling passivation for aluminum, application for battery boxes for electric cars
BONDERITE® M-NT 40043 – cleaner-coater, cleaner + coating in one, replaces iron phosphating
BONDERITE® M-NT 30002 – Conversion treatment for zinc, steel and aluminum surfaces