Activators which increase the adhesion and ageing resistance of certain substrates such as glass or aluminium by creating chemical bonds between substrate and primer.
Film-forming glass, plastic and metal primers which, in addition to the adhesion promoter, also increase the UV and corrosion protection of an adhesive bond.
Cleaner for the removal of dirt such as dust, grease and oil from adhesive surfaces. Depending on the application, cleaners are available for use on metals, plastics, glass and other substrates.
Due to the cross-linking by installation of released water from the B-component, large adhesive layer thicknesses and a high hardening speed can be achieved.
Suitable for flexible glass-to-metal bonding and showcase construction, partly specially designed for the production of foam seals, e.g. for household appliances, electrical and electronic housings.
Room temperature crosslinking adhesives and sealants for the encapsulation of electronic assemblies, for the bonding of cooker components (FDA-approved), engine components with high temperature loads, car headlights and for showcase construction.
Through special activation, they enable a hardening process without condensation products (e.g. acetic acid) even in closed joints without access to humidity and offer particularly fast hardening.
Room temperature crosslinking adhesives and sealants for industry and trade, maintenance and repair, high-performance applications with high temperature resistance, protection and coating of electronic assemblies with castable products.
Room temperature curing (RTV) 1- or 2-component adhesive and sealing compounds based on silicone and hybrid with a broad adhesion spectrum in electrics, electronics, household appliances, food contact, headlight bonding and many more.
Air humidity curing, overpaintable, elastic adhesive and sealing compounds based on 1-component polyurethane for sealing, filling and sealing in vehicle construction.
Rubber-based, expandable sealing and relining adhesives with low strength. To prevent vibrations by compensating for tolerances and sheet spacings in the carcass.
UV adhesives contain a photoinitiator that after the supply of UV or blue light of certain wavelengths in the acrylate initiates the curing process. When UV adhesives are used, the parts to be joined are strengthened by the resulting strong chemical compound.
