Select Page
Search
Generic filters
Exact matches only

Electronic casting & encapsulation

In the electrical industry, the encapsulation of electrical and electronic components and assemblies is increasingly being used to improve electrical properties, thermal stability and mechanical strength as well as to protect against the effects of chemical substances and environmental influences. Depending on the product, the production technology and the respective operating conditions, different electrical insulation materials with specificproperties are used.

Adhesives for electronic components

Adhesives are used in a wide variety of applications in the manufacture of electrical or electronic components and devices, such as the assembly or fixing of components or the bonding or sealing of housings. In addition to the actual adhesion properties, other special requirements such as flame retardancy and heat conduction often have to be taken into account.

Casting resins & encapsulants

Materials for the classical potting of components or assemblies suitable for manual or plant potting under atmospheric pressure, vacuum or pressure gelation. Depending on therequirements, potting materials with thermoset or elastomeric end properties on different chemical bases (polyurethanes, epoxy resins, silicones) and with different processing and curing properties are used.

Hotmelt casting compounds

Thermoplastic plastics for low-pressure casting in electronic and electrical applications, e.g. casting of circuit boards and plugs, sealing of cables. Hotmelt materials are not reactive. The application takes place in solid forms, comparable to plastic injection moulding. The materials used are high-quality thermoplastic polyamide hot-melt adhesives (PA) with elastomeric properties.

Impregnating resins

Impregnating resins based on epoxy resin cure without releasing volatile substances and result in end products with excellent electrical and mechanical properties with extremely low shrinkage. They are therefore particularly suitable for impregnating high-voltage windings.

Other materials & auxiliaries for electric processing

Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum.

Silicone encapsulants

Silicones are elastomeric materials with high elasticity. They are characterized by excellent low-temperature flexibility, which makes them particularly suitable for encapsulating pressure-sensitive components. Silicone encapsulants enable high operating temperatures and exhibit very good chemical resistance. Depending on the application, electro casting predominantly uses addition-curing 2-component systems, but also air moisture-curing 1-component products.

Trickle resins

Trickle resins are mainly used in electrical engineering for impregnating the windings of motors and generators. Optimally adjusted rheological properties and the specific gelling and curing behavior of the resin systems enable impregnation using the rotary trickle process.

Adhesives for electronic components

Adhesives are used in a wide variety of applications in the manufacture of electrical or electronic components and devices, such as the assembly or fixing of components or the bonding or sealing of housings. In addition to the actual adhesion properties, other special requirements such as flame retardancy and heat conduction often have to be taken into account.

Casting resins & encapsulants

Materials for the classical potting of components or assemblies suitable for manual or plant potting under atmospheric pressure, vacuum or pressure gelation. Depending on therequirements, potting materials with thermoset or elastomeric end properties on different chemical bases (polyurethanes, epoxy resins, silicones) and with different processing and curing properties are used.

Hotmelt casting compounds

Thermoplastic plastics for low-pressure casting in electronic and electrical applications, e.g. casting of circuit boards and plugs, sealing of cables. Hotmelt materials are not reactive. The application takes place in solid forms, comparable to plastic injection moulding. The materials used are high-quality thermoplastic polyamide hot-melt adhesives (PA) with elastomeric properties.

Impregnating resins

Impregnating resins based on epoxy resin cure without releasing volatile substances and result in end products with excellent electrical and mechanical properties with extremely low shrinkage. They are therefore particularly suitable for impregnating high-voltage windings.

Other materials & auxiliaries for electric processing

Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum. Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed diam nonumy eirmod tempor invidunt ut labore et dolore magna aliquyam erat, sed diam voluptua. At vero eos et accusam et justo duo dolores et ea rebum.

Silicone encapsulants

Silicones are elastomeric materials with high elasticity. They are characterized by excellent low-temperature flexibility, which makes them particularly suitable for encapsulating pressure-sensitive components. Silicone encapsulants enable high operating temperatures and exhibit very good chemical resistance. Depending on the application, electro casting predominantly uses addition-curing 2-component systems, but also air moisture-curing 1-component products.

Trickle resins

Trickle resins are mainly used in electrical engineering for impregnating the windings of motors and generators. Optimally adjusted rheological properties and the specific gelling and curing behavior of the resin systems enable impregnation using the rotary trickle process.

Ara® Ecocleaner Precision cleaner for electro casting

Cleaner/rinsing agent for the removal of polymer residues such as polyurethane and epoxy resins, non-hazardous, biodegradable.

Aradur® Hardeners

Amine and anhydrite-based hardener products for use with epoxy resins.

Araldite® 2-component epoxy casting resins

Unfilled and filled, cold and hot-curing epoxy resin-based casting compounds for atmospheric or vacuum casting with a wide range of properties.

Araldite® 2-component epoxy trickle resins

Trickle resins with very good electrical properties, high mechanical strength and heat form stability, suitable for high operating temperatures.

Araldite® Epoxy impregnating resins for casting

Epoxy resin systems for impregnation of windings in classical atmospheric or vacuum casting.

Araldite® Epoxy impregnating resins for dip impregnation

Epoxy resins with particularly high storage stability in immersion baths for use in impregnating baths, with high glass transition, suitable for high and operating temperatures.

Araldite® Flame retardant epoxy adhesives

Flame retardant 2-component adhesives with classified fire performance according to UL94 and EN 45545-2 standards.

Araldite® Thermally conductive epoxy adhesives

2-component adhesives with higher thermal conductivity values for improved heat transfer of components.

Arathane® 2-component polyurethane casting resins

Potting compounds with very good processing properties, for very flexible to hard moulding materials with good temperature stability up to thermal class F, thermally conductive, UL94.

Aratherm® High thermally conductive epoxy casting resins

Hot-curing 1-component epoxy resin systems with very high thermal conductivity.

AXAREL® Precision cleaner for electronics production

Solvent-based cleaner for adhesive tape and flux residues, residues of SMD adhesives and solder pastes. Can be used manually or in immersion and ultrasonic cleaning processes.

BETAFORCE™ Thermally conductive PU adhesive


BIOACT® Precision cleaner for electronics production

Batch flux cleaner for use in spray, immersion or ultrasonic cleaning processes.

Bluesil™ 2-component silicones

2-component silicone casting compounds, optically clear or containing filler for higher heat dissipation.

Bluesil™ Silicone gels

2-component silicones with gel-like end properties, extremely low hardness and extremely low elasticity modulus, optically clear.

Bluesil™ silicone pastes and greases


Euromelt® 2-component polyamide hotmelt casting compounds

1-component co-polyamides for a wide operating temperature range and low viscosity for very good flow behavior with only low potting pressure.

LENIUM® Precision cleaner for electronics production

Steam degreasing products and solvent cleaners for use with open or closed vacuum steam cold cleaners.

Pactan® 1-component silicones

Neutral-curing 1-component silicones with very good adhesion properties for potting and sealing electrical components.

RenLease® Release agents

Wax or silicone oil based release agents as demoulding aid for mould bound electro casting.

Thermally conductive silicones

2-component silicone casting compounds, gels and gap fillers with excellent thermal conductivity.

Bodo Möller Chemie

Partners

Solutions

Events

JEC World 2020

03.03.2020, Paris

Bonding Seminar 2020

14.05.2020, Augsburg

News

The specialty chemicals expert distributes innovative Loctite products for electrical and electronics applications

Comprehensive ISO-certified production with growing capacity for epoxy resins, polyurethanes and packaging fillers