Select Page
Search
Generic filters
Exact matches only

E-mobility

E-mobility applications demand high performance encapsulants, gap fillers and adhesives. Thermally conductive materials optimize the heat management and ensure higher performance and extended lifetime of electrical and electronic components. Our epoxy, polyurethane and silicone adhesives, encapsulants, casting and impregnating resin systems offer a wide range of high-performance products for the encapsulation of electrical control units, motors, batteries, wiring harnesses, connectors, inverters, converters, sensors and switches.

Bonding and encapsulation of electric motors

Powerful electric motors and generators require very good electrical properties, high mechanical strength and thermal stability. This is achieved by impregnating stator and rotor windings in the trickle process and in immersion and impregnation baths, including the use of VPI technology. Partial or full casting of stators serves to improve the mechanical and thermal properties, in particular heat dissipation.

Bonding and encapsulation of low-voltage batteries

Batteries for “last mile” vehicles are often based on 48 V technology. Encapsulants protect and provide thermal management to ensure long life time and reliable performance. Resins, encapsulants and casting materials based on Silicone, Polyurethane or Epoxy chemistry offer a broad spectrum of solutions.

Bonding and encapsulation of sensors and automotive electronics

As in conventional automobiles, sensors and electronics in electrical vehicles are exposed to harsh environments and expected to function reliably for many years. Proven adhesives, encapsulants and gels, based on Silicone, Polyurethane or Epoxy chemistry protect the electronic components.

Bonding and thermal management of high-voltage batteries

Batteries are a very common form of energy storage, the integration of high voltage batteries into electric vehicles is quite complex. The selection of adhesives and sealants depends on the desired strengths, service considerations and to a great extent on the manufacturing requirements. A wide spectrum of adhesive systems offers the industrial designer new technology options and thermal management solutions for high-voltage batteries.

Lightweight construction

Bonding and encapsulation of electric motors

Powerful electric motors and generators require very good electrical properties, high mechanical strength and thermal stability. This is achieved by impregnating stator and rotor windings in the trickle process and in immersion and impregnation baths, including the use of VPI technology. Partial or full casting of stators serves to improve the mechanical and thermal properties, in particular heat dissipation.

Bonding and encapsulation of low-voltage batteries

Batteries for “last mile” vehicles are often based on 48 V technology. Encapsulants protect and provide thermal management to ensure long life time and reliable performance. Resins, encapsulants and casting materials based on Silicone, Polyurethane or Epoxy chemistry offer a broad spectrum of solutions.

Bonding and encapsulation of sensors and automotive electronics

As in conventional automobiles, sensors and electronics in electrical vehicles are exposed to harsh environments and expected to function reliably for many years. Proven adhesives, encapsulants and gels, based on Silicone, Polyurethane or Epoxy chemistry protect the electronic components.

Bonding and thermal management of high-voltage batteries

Batteries are a very common form of energy storage, the integration of high voltage batteries into electric vehicles is quite complex. The selection of adhesives and sealants depends on the desired strengths, service considerations and to a great extent on the manufacturing requirements. A wide spectrum of adhesive systems offers the industrial designer new technology options and thermal management solutions for high-voltage batteries.

Lightweight construction

3D carbon fabrics

Weaving techniques can be used to produce near net-shape preforms.

Aradur® Hardeners

Amine and anhydrite-based hardener products for use with epoxy resins.

Araldite® 2-component epoxy resin adhesives

Depending on the type, they can be used for structural bonding of metals, thermosets and reinforced plastics. Can have very high strength and temperature resistance (up to 210°C).

Araldite® 2-component epoxy trickle resins

Trickle resins with very good electrical properties, high mechanical strength and heat form stability, suitable for high operating temperatures.

Araldite® / Aradur® Formulated resin / hardener systems

High-performance resin systems for all industrial applications, available in various varieties for all common manufacturing processes.

Araldite® Epoxy base resins

For formulation by the end user, many product variants are mostly available in large containers.

Araldite® Epoxy impregnating resins for casting

Epoxy resin systems for impregnation of windings in classical atmospheric or vacuum casting.

Araldite® Epoxy impregnating resins for dip impregnation

Epoxy resins with particularly high storage stability in immersion baths for use in impregnating baths, with high glass transition, suitable for high and operating temperatures.

Araldite® Thermally conductive epoxy adhesives

2-component adhesives with higher thermal conductivity values for improved heat transfer of components.

Arathane® 2-component polyurethane casting resins

Potting compounds with very good processing properties, for very flexible to hard moulding materials with good temperature stability up to thermal class F, thermally conductive, UL94.

Aratherm® High thermally conductive epoxy casting resins

Hot-curing 1-component epoxy resin systems with very high thermal conductivity.

BETAFILL™ – 1K Polyurethane seam sealer


BETAFORCE™ 2-component polyurethane structural adhesives, high modulus

Room temperature fast curing 2-component polyurethane adhesive with high mechanical strength and high elongation at break, specially developed for structural bonding.

BETAFORCE™ Hybrid adhesive sealants for sealing welded housings


BETAFORCE™ Thermally conductive PU adhesive


BETAMATE™ 1-component epoxy resin adhesives

Specially developed for use in automotive shell construction to increase crash stability and stiffness. They adhere excellently to the oiled steel and aluminium grades used.

BETAMATE™ 1-component polyurethane structural adhesives

Air humidity curing 1-component polyurethane adhesives and sealants for high-strength, permanently elastic adhesive joints with accelerated curing.

BETAMATE™ 2-component epoxy resin adhesives

For crash-resistant structural bonding of repair sheets and metals in general as well as fiber-reinforced plastics. Achieves approximately the strength of 1K epoxy resin adhesives.

BETAMATE™ 2-component polyurethane structural adhesives

2-component polyurethane adhesive for direct glazing which harden quickly at room temperature. Suitable for bonding metals, plastics and composites, provided that appropriate pre-treatment has been applied.

BETASEAL™ 1-component polyurethane adhesives for direct glazing

Highly viscous, air-humidity-curing 1-component polyurethane adhesive and sealing compounds for direct glazing in vehicle construction with diverse type-dependent properties.

BETASEAL™ Polyurethane gap filler


Bluesil™ 2-component silicone casting compounds

For all areas of mold making where highly flexible molding compounds have to be used.

Bluesil™ 2-component silicones

2-component silicone casting compounds, optically clear or containing filler for higher heat dissipation.

Bluesil™ Silicone gels

2-component silicones with gel-like end properties, extremely low hardness and extremely low elasticity modulus, optically clear.

Bluesil™ silicone pastes and greases


CAF® 2-component silicone adhesives

Through special activation, they enable a hardening process without condensation products (e.g. acetic acid) even in closed joints without access to humidity and offer particularly fast hardening.

CeraPur – 1K Polyurethane foam gasket


Elkem CAF silicone elastomer gasket

Two-component silicone elastomers for injection molded seals, proven in many automotive applications

Epocast® Resin systems

High-performance resin systems for all industrial applications, available in various varieties for all common manufacturing processes.

Euromelt® 2-component polyamide hotmelt casting compounds

1-component co-polyamides for a wide operating temperature range and low viscosity for very good flow behavior with only low potting pressure.

Innegra Polypropylene fabrics

Is a high modulus polypropylene fibre which can be used independently or in conjunction with other fibres to provide weight reduction, excellent levels of impact resistance and damage tolerance.

L&L Hybrid sealants

Primerless UV-stable adhesive and sealing systems on hybrid basis with strong adhesion to metal, composites, thermoplastics with a broad mechanical spectrum.

L&L Room Temperature curing MMA Adhesives

Structural 2-component, methacrylate-based adhesives. Broad adhesion spectrum on different substrates. High strengths, fast curing times and elongation at break up to 70%.

L&L structural adhesive films

Self-adhesive EP adhesive strips, activated by heat, typically used in body-in-white construction. Different expansion rates enable bridging of gaps, compensation of thermal expansion and galvanic separation of substrates. Reinforcement of flat components.

Multiaxial carbon fabrics

Very flat, non-crimp fabrics from 100gsm with 2 layers and up to 1600gsm with a maximum of 9 layers, can be produced in widths up to 2540mm (100 inches).

Recycled carbon fabrics

Fabrics contain reclaimed carbon fibre, resulting in products that are sustainable and cost effective.

RTF – 2K Silicone foam gasket


Thermally conductive silicones

2-component silicone casting compounds, gels and gap fillers with excellent thermal conductivity.

Undirectional carbon fabrics

Fabrics have carbon fibres just in one direction.

Woven carbon fabrics

Abrics are used in traditional fabric construction such as plain weave, twill and satin patterns and also more complex designs for aesthetic and performance applications.

Events

JEC World 2020

03.03.2020, Paris

Bonding Seminar 2020

14.05.2020, Augsburg

News

The specialty chemicals expert distributes innovative Loctite products for electrical and electronics applications

Comprehensive ISO-certified production with growing capacity for epoxy resins, polyurethanes and packaging fillers